Wondering how to look glamorous and yet stick with a budget? These cute handcrafted Handmade Black and Silver DIY Geometric Earrings are fun, easy and so stylish. Make some for yourself or as gifts, no one will say no to these cuties!
Category DIY & Craft
Topic Gifts, Handmade Jewelry
Keyword Chain and Beads jewelry, DIY Geometric Earrings, Geometric Earrings tutorial, Geometric Earrings with chain and beads
Prep Time 5 minutesmins
Crafting Time 25 minutesmins
Total Time 30 minutesmins
Pieces 1Pair
Author Camila Rojas
Cost 10
Equipment
Wire cutter.
Flat Nose Pliers
Bend flat nose pliers
Round nose pliers
Ingredients
12black beads {about 6mm}
2Silver sparkling beads {about 8mm}
Silver chain
4Jump rings {5mm}
2Earring hooks
Instructions
STEP 1: THE BASE OF THE EARRINGS
Take your eye pin and insert 3 black beads, 1 silver bead, and 3 black beads.
We need another eye on the other end so let’s do a wire loop.
Bend the wire at 90 away from you with your round nose pliers, and change the plier’s position to hold the other side of the wire.
Bring the wire all the way around to make a loop and trim with a cutter as close as possible to the main wire.
STEP 2: GETTING YOUR CHAIN READY
Now cut your chain by about 21 chain links {more or less depending on the chain you chose}. It’s supposed to be 10 links on each side and one for linking with the earn hook.
STEP 3: JOINING BASE AND CHAIN
Slightly open the loop on your black and silver wire and insert one end of the chain.
Close the loop again carefully.
You can always use jump rings for this too.
Then do the same on the other end.
STEP 4: ATTACHING YOUR EARRING HOOK
Then using your round nose pliers pick the eleventh chain link.
Using two of your pliers open a jump ring and insert the earring hook and your chain link.
Close the jump ring.
I always use double jumping to avoid falling off from the erring hook.
Repeat the process with the second earring and you are all done!